Battery Storage Systems

Squirrel Pod

Modular battery storage installed at properties with or without solar systems.

The Squirrel Pod systems can be linked together to make larger capacity systems which work as one. The systems work with or without solar panels. Programmable to work with all Off Peak electricty providers. The Lux AC retrofit is supported by the ‘Works with Octopus’ Agile Auto Charge programme to allow automatic charging, or automatic buying and selling using the prices published by Octopus Agile.

Discover more >

Lux AC Retrofit

Battery Storage is installed at properties with existing solar systems.

This system does not affect or change the existing solar installation. The Lux AC retrofit is supported by the ‘Works with Octopus’ Agile Auto Charge programme to allow automatic charging, or automatic buying and selling using the prices published by Octopus Agile.

Discover more >

On Grid Hybrid

Installed as part of new solar installations or to upgrade and replace existing inverters.

The Lux Hybrids have a number of leading features which make them unique compared to other manufacturers. The 3.6 Hybrid is G98 but can support up to 7kw of Solar PV. The Lux Hybrid units are supported by the ‘Works with Octopus’ Agile Auto Charge programme to allow automatic charging, or automatic buying and selling using the prices published by Octopus Agile.

Discover more >

Off Grid Hybrid

If you are looking to combine a solar inverter with battery storage, then the Lux Hybrid units are a market leading choice.

The Lux Hybrids have a number of leading features which make them unique compared to other manufacturers. When working with Off Grid it is important to plan for the future. The 3.6kw units can be set up to work as off grid systems along with the ability to run with generator back up. The 3.6kw system cannot be linked (paralleled) to additional units to make larger systems, this is the reason for the 5kw Parallel units.

Discover more >

Commercial Storage System

On Grid Hybrid

Installed as part of new solar installations or to upgrade and replace existing inverters.

The Lux Hybrids have a number of leading features which make them unique compared to other manufacturers. The 3.6 Hybrid is G98 but can support up to 7kw of Solar PV. The Lux Hybrid units are supported by the ‘Works with Octopus’ Agile Auto Charge programme to allow automatic charging, or automatic buying and selling using the prices published by Octopus Agile.

Discover more >

Featured Solution

On Grid Hybrid

Installed as part of new solar installations or to upgrade and replace existing inverters.

The Lux Hybrids have a number of leading features which make them unique compared to other manufacturers. The 3.6 Hybrid is G98 but can support up to 7kw of Solar PV. The Lux Hybrid units are supported by the ‘Works with Octopus’ Agile Auto Charge programme to allow automatic charging, or automatic buying and selling using the prices published by Octopus Agile.

Discover more >

Octopus Agile Auto Charge

Lux power battery storage - Octopus Agile Auto Charge

Lux Power with Infinity Innovations Ltd. have developed an Agile Auto Charge (AAC) to allow automatic off peak charging using the cheapest rates available. This is a Beta system and therefore reacts to data provided by Octopus. Lux Power have no involvement or responsibility for content or timing of the information provided. It is recommended that you read the Octopus Blog regarding all systems approved as compatible with Octopus - https://octopus.energy/blog/works-with-octopus/

Discover more >

Renewable Hot Water

Thermopod Retrofit

Thermopod units can be fitted to existing hot water cylinders.

They will then take over the heating of the hot water day and night 365 days of the year. The existing heating system can simply remain in place as a secondary source should you ever need additional generation or any back-up solution.

Discover more >

Thermo Retrofit with New Cylinder

Thermopod units are frequently fitted with new hot water cylinders.

This can be because there was no cylinder previously installed, or the cylinder was old and needed to be upgraded, or because the customer wants to change from non-pressurized to pressurized.

Discover more >

ThermoPod Commercial

Thermopod units can be cascaded together to make larger and larger systems.

For commercial applications where larger volume of hot water is required, or where greater heating capacity is needed, then multiple systems can be installed and linked to work together as a single larger system.

Discover more >

CO2 Heat Pumps Commercial

The CO2 heat Pumps are Air Source Heat Pump systems, so they take energy from the ambient air and transfer it to a water source.

However the CO2 units work under much higher pressure than standard heat pumps, which is why they can achieve extremely high water temperatures of up to 90 degrees.

Discover more >

Air Source Heat Pumps

Air Source Heat Pumps (ASHP’s) absorb heat energy from the outside air. This energy is transferred into your home and used to provide central heating and hot water.

With little maintenance and outstanding thermal efficiencies, these sophisticated, cost-effective and eco friendly heating systems can reduce your heating bills whilst providing and income through the Governments Renewable Heat Incentive that pays the homeowners up to £1,500 per year, for 7 years, for installing these modern renewable technologies.

Discover more >

Renewable Hot water and space Heating

Thermopod Hybrid

Thermopod Space Heating

The Thermopod Hybrid system is a concept that takes two of our Thermopod Thermodynamics systems installed alongside a Smart intelligent Tank-In-Tank water cylinder which takes over the heating of your hot water and contributes towards the heating of your home. The Thermopod Hybrid uses a Smart cylinder to allow the Thermopod units to heat both your hot water and your central heating water. Your existing heating system becomes a back-up to the Thermopod, kicking in if the heating demands exceed the Thermopod capacity.

Discover more >

CO2 Heat Pump

The CO2 heat pump solution is quite different to a generic heat pump.

Their primary function is to create exceptionally hot water while using only very small electrical power. Typically the water coming out of a CO2 heat pump will be at above 80 degrees. Although extremely hot the flow rate is lower meaning they are applied and run differently to standard lower temperature untis.

Discover more >

Air Source Heat Pump

Air Source Heat Pumps (ASHP’s) absorb heat energy from the outside air. This energy is transferred into your home and used to provide central heating and hot water.

With little maintenance and outstanding thermal efficiencies, these sophisticated, cost-effective and eco friendly heating systems can reduce your heating bills whilst providing and income through the Governments Renewable Heat Incentive that pays the homeowners up to £1,500 per year, for 7 years, for installing these modern renewable technologies.

Discover more >

We use cookies to ensure that we give you the best experience on accessing Infinity Innovations website. If you continue to use this site we will assume that you are happy with it.

ok